Pile foundations are usually subjected to cyclic loading which can be either environmental or industrial. Loading and unloading sequences of the pile cause very significant variation in the behavior of the pile-soil system and generate degradation of the bearing capacity and an accumulation of irreversible displacement. The paper presents a study of the behavior of piles subjected to axial cyclic loading for large numbers of cycles using a physical modeling approach in a calibration chamber. To focus on the degradation of the friction in soil-pile interface, the experiments are carried out in two-way displacement–controlled tests. Firstly, The experimental set-up was presented, then the typical results of the evolution of skin friction under cyclic loading. The results indicate that the application of a large number of cycles to the pile, the skin friction decrease initially then increase continually up to the end of the cyclic sequence. It can be concluded that the phase of friction reinforcement is due to a partially constrained dilatancy phenomenon of the sand within the interface zone.
-
Votre commentaire
Votre commentaire s'affichera sur cette page après validation par l'administrateur.
Ceci n'est en aucun cas un formulaire à l'adresse du sujet évoqué,
mais juste un espace d'opinion et d'échange d'idées dans le respect.
Posté Le : 06/07/2021
Posté par : einstein
Ecrit par : - Bekki Hadj - Tali Brahim - Canou Jean - Dupla Jean-claude - Bouafia Ali
Source : Journal of Applied Engineering Science & Technology Volume 1, Numéro 1, Pages 11-16